Skip to main content
Version: 3.25

Administration

Operational screens

Operational screens are screens where the administrator can influence the behavior of the senhasegura.go installation.

As we have seen in the installation process, it is possible to deal with operations of the workstation where it is installed and separately with the user who is using it. Sometimes more than one user can use the same workstation. And the settings and operations of one user cannot affect the other.

Workstations Report

Through the menu GO Endpoint Manager ➔ Workstations you can have access to the workstations that have an installation of senhasegura.go .

Workstations report

The registers are distinguished by their features, and have a color status indicator on the column Status. The values can vary from:

  • Pending: New installations that have not yet been approved or refused by the administrator. Not allowed to operate while there is no approval

  • Enabled: Installations that have already been approved by the administrator and can use the features on the workstation;

  • Disabled: Installations that have been disabled by the administrator. That is, they cannot operate the senhasegura.go ;

The Pending status will only be displayed if automatic approval of workstations and users is not active. senhasegura by default comes with these options inactive, forcing the administrator to manually approve workstations and users.

This report does not have actions to add a workstation. One workstation is just added in case there is an installation with senhasegura.go activation enabled on the workstation itself.

Some registration actions will also vary depending on the status:

  • Detail: Presents the status dates of the workstation and its unique identifier. This unique identifier is used for in-depth diagnostics by our support team;

    Detaisl report
  • Users: Presents the list of users who ran senhasegura.go on this workstation. This report will be explored further;

  • Events: They are all events captured by senhasegura.go services or executed by users through senhasegura.go in this workstation. This report will be explored later;

  • Disable: Present only in the Enabled state, this action inactivates the use of senhasegura.go in the workstation;

  • Enable: Authorizes the use of senhasegura.go on this workstation. This the present status;

Users Report

Through the menu GO Endpoint Manager ➔ Users, you can have access to the users that have used senhasegura.go . This report allows the administrator to filter by fields that allow crossing different origins and identify the different connections between the senhasegura users and the workstations where they made use of senhasegura.go .

Users Report

The Status field, just like in the workstation report, shows the status of this user on that particular workstation. Therefore, a username may be enabled to use the senhasegura.go on one workstation and be prohibited to use on another workstation.

  • Pending: Users who have not been evaluated by the administrator to use senhasegura.go . Not allowed to operate while there is no approval;

  • Enabled: Users who have been approved by the administrator and can use the features on the workstation;

  • Disabled: Users who have been revoked by the administrator. That is, they cannot operate the senhasegura.go ;

It is not possible to add new registers through this report. The user registration just occurs in case a user makes use of senhasegura.go on a workstation where senhasegura.go is installed and activated.

Actions per record may vary between:

  • Enable: Present in Pending and Disabled status, it allows the user to use the senhasegura.go . You can indicate an expiration date of this approval, which after expiration, automatically will be the approval will be revoked

  • Revoke: Present in Pending and Enabled status, refuses the use of this user's senhasegura.go on the workstation. This does not prevent the user from making a new request on another workstation. The refusal will also not be expanded to other valid approvals this user has on other workstations and will also not disable the use of the workstation for other users;

  • Detail: Presents this user's details regarding approval, inactivation and inclusion dates;

Applications and Uninstallers Report

In the menu GO Endpoint Manager ➔ Applications you can view all applications that have already been automatically mapped by the services of senhasegura.go , or executed by users through senhasegura.go .

Applications Report

An application is unique to the senhasegura , regardless of its installation folder and the name of its binary. This way, senhasegura.go is able to identify its different versions and centralize the registration to create the segregation.

This also allows the administrator to identify the different versions installed in your machine park. Its registration actions also allow visualization of execution events.

Execution events

In the menu GO Endpoint Manager ➔ Uninstallers there is a list of all uninstallers of applications identified in workstations.

Because they are also applications, their registration actions are identical to the actions of the application report.

Control Panel applet report

The Control Panel applets are pre-configured. This is necessary because Microsoft has different ways to access the controls for each Windows version.

You can access the controls through the menu GO Endpoint Manager ➔ Control panel.

In this report you can observe each command used to achieve control, and which Windows versions are compatible.

The registration action presents a report with all events from when a workstation executed the high access control.

Event Report

This report is present as a detail in all records of the Workstations, Applications, Uninstallers, Control Panel reports and DLLs.

In this report, each automatic or intentional action of the user is centralized from senhasegura.go . When accessed as detailing, you have the filtered and reduced view of the source entity. But accessing through the menu, you have access to all filters and the possibility of combinations to identify the events that are occurring in workstations.

In the action field is possible to change permissions of a previously executed application by the user, restricting or allowing the application so that the user will or won't be able to use this tool again in a future moment.

caution

DLLs included only after starting the process will be analyzed. If a user tries to open a file that has any DLL that is considered untrusted, the system will generate an event called Untrusted DLL execution attempt and will turn off the application. The event will be notified via SYSLOG and available to an e-mail configuration.

Event Report

Report on elevations and videos

When a user performs an elevation of an application, senhasegura will record a video while the thread of that application is active. As soon as the thread is finished, the video is sent to the senhasegura server and becomes available for evaluation.

Like all recorded sessions, it can be accessed in the menu PAM Core ➔ Access control ➔ Remote sessions. You can filter through the Proxy filter with the value senhasegura.go to list only the sessions coming from senhasegura.go .

Through the register action Video of session you can watch the video.

caution

This feature will only be available if the Enable recording session parameter is active.

Remote sessions report

Workstation Access History

Through workstation access history located in GO Endpoint Manager ➔ Reports ➔ Workstation Access History, it will be possible to verify how many access, the last and the first access of a determined user on a determined workstation. It is possible to filter by user, access, date, time, and ID.

Configurations and segregation

By default, some features of senhasegura.go are inactive. You must activate them manually to use them.

Global settings

The parameters can be accessed through the menu GO Endpoint Manager ➔ Settings ➔ Parameters or Setting ➔ System parameters, and finally by accessing the go tab.

senhasegura.go parameters
caution

All parameters on this screen are of global level, that is, valid for all users. We will talk later about segregation that allows us to create different combinations of settings for each workstation or users.

The parameters are separated into sections:

Modules

The module settings control the display of the senhasegura.go respective sub-modules. They are:

  • Enable credentials;

  • Enable applications;

  • Enable uninstall;

  • Enable network share;

  • Enable network interface;

  • Enable control panel;

Installation settings

The Installation settings control the installation settings for senhasegura.go client.

  • Allow self-approval of workstations links: Indicates whether a workstation should be automatically approved when receiving a valid license from senhasegura.go ;

  • Allow self-approval of user's first link: Indicates whether the first user should be automatically approved if you use the senhasegura.go on a previously approved machine;

  • Allow self-approval of all others links: Indicates if all other users who come to use senhasegura.go on a previously approved machine will also be automatically approved;

  • Enable client software automatic update: Indicates if the senhasegura.go should be automatically updated if a new version is available on the server;

  • Enable user expiration: Indicates whether it will be mandatory to set an expiration date for the user's authorization;

  • Days interval to expire users: It will be the number of days that the user will expire after approval. This value will determine the end date on the user approval form;

General settings

The general settings are a generic section in the settings for senhasegura.go client.

  • Enable recording session: By default inactive, it indicates if the recording of high applications should be recorded on video during its execution. At the end, the video will be sent to the senhasegura server;

  • Enable Single Sign-On: If active, it allows the senhasegura.go to start an authenticated session of the senhasegura web in the user's default browser, without the user having to enter a password. If the user is required to have a MFA token, it will be requested in the web system;

  • Enable UAC integration: If active, the senhasegura will intercede at UAC moments allowing the user to type a credential that can continue the process;

  • Enable control of applications integrated to the operating system: If active, senhasegura.go will activate the driver that monitors the applications running in Windows and will interfere if the application is outside the allowlist or inside the denylist. Only applications from user sessions will be evaluated;

These parameters are linked to the installation and approval process:

  • Enable automatic certificate inactivation by intrusion attempt: Indicates if the single communication certificate between workstation and server will be inactivated in case the server detects an intrusion in the senhasegura.go ;

These parameters are linked to special features of senhasegura.go :

  • Enable vault: Indicates whether the senhasegura.go Offline is allowed. This feature will be discussed in more detail later on.

    • Minutes interval to request credentials: While the workstation is online, a secure cache of credential information will be updated within this time frame.
  • Block access to network: Indicates whether the user will be blocked from any attempt to access a TCP or UDP network address.

    • Block user: Indicates if the senhasegura user linked to the action will be blocked after exceeding a number of network access attempts;

    • Occurrences (minimum): These are the quantities of times to consider before blocking the senhasegura user;

  • Elevation of privilege: Indicates if the senhasegura will monitor applications that try to execute privilege elevation outside the senhasegura.go . If active, the attempt will be prevented.

    • Block user: Indicates if the user senhasegura linked to the action will be blocked after exceeding a number of elevation attempts;

    • Occurrences (minimum): These are the quantities of times to consider before blocking the user senhasegura ;

  • Enable multi-factor authentication at login: If active and the user linked to the senhasegura has MFA token configured, this token will be requested when performing local login on the workstation or access via RDP;

  • Enable JIT access: If active, the user using senhasegura.go will be added to the local Windows administrators group and their actions will be audited by video while they remain in this group.

    If the user exits the JIT using the same activation button, perform a log off, or shutdown the computer, the user will be removed from the group immediately;

Configure segregated settings

Segregated configurations are used mainly to handle workstation-specific scenarios. Sometimes the workstation belongs to a user who demands special attention or a differentiated use. All settings seen above are in a global context. The global parameter works only per workstation, being able to deny access to some users and only allow access to a specific group and vice versa. To access segregation settings, access the report in the GO Endpoint Manager ➔ Settings ➔ Segregated Parameters menu. You can change existing segregations in the actions menu by clicking on the Edit option or to create a *New Segregation for workstation**.

A screen called Segregated Parameter for Workstations will open, and you will have access to configure the General and Workstation tabs:

General: Define network access, privilege elevation, authentication, and important messages related to execution. Workstation: Add a previously installed and approved workstation to the system. If you don't have it, see what the (prerequisites)[.requirements.md] and (how to install)[./install.md] are.

The segregated parameter has priority over the global parameters, for example:

  • The global parameter is inactive, but the segregated parameter is active
    • Status: The parameter will be active
  • The global parameter is active, but the segregated parameter is inactive
    • Status: The parameter will be inactive
  • The global parameter is active, and the segregated parameter is also active
    • Status: The parameter will be active
  • The global parameter is inactive, and the segregated parameter is also inactive
    • Status: The parameter will be inactive
  1. The general parameter must be enabled in GO Endpoint Manager ➞ Settings ➞ Parameters ➞ go ,
  2. Go to the Modules section where the option Enable Control Panel? must be selected as Yes to allow
  3. If you choose to deny, go to GO Endpoint Manager ➔ Settings ➔ Segregated Parameters and Enable Control Panel? must be selected as No
  4. Add the machines that you don't want to enable a specific feature